Vertical Coal (Charcoal) Crusher
The vertical coal crusher is widely used for crushing various materials like stone, granite, trap rock, coke, coal, manganese ore, iron ore, emery, fused aluminum, oxide, fused calcium carbide, lime stone, quartzite, alloys, etc. Usually applied in coal, charcoal briquette plant. You must match crusher if the input size of your raw material is larger than 5mm before coal briquetting.

Vertical Crusher

Features of The Vertical Charcoal Crushing Machine This crusher is suitable for dry and wet crushing with high reduction ratio. Perfect for crushing materials with high moisture; high silt content materials will not be blocked. Discharging size can be adjusted freely. Materials that can not be crushed will be discharged automatically and do no damage to the crusher. Lower noise (less tha 75 db) and dust pollution.

Working Principle:

• The motor drives the rotor which fixed on the main bearing to run quickly toward certain direction when the crushing machine works. Because the impact board is bevel and the gravitation, the materials are threw to the taper crushing room and impacted by the high-rotating up hammerhead. After gaining sufficient energy, the materials are thrown to the impact board again and action repeats.
• The materials strike with each other in the crushing room and then are down to the column-shape rotor room. Then crushed, pressed, and ground and action repeats. In this way, the materials go through up, middle, and down rotor crushing rooms and crushed, pressed, and ground by the hammers and the impact boards, and finally the materials are gradually crushed into needed sizes and come out.

Techincal Data of Coal/Charcoal Crusher Machines

Model	ZZLP500	ZZLP650	ZZLP750	ZZLP1000
Power (kw)	Y200L-4-15	Y200L-4-22	Y200L-4-37	Y200L-4-45
Output (t/h)	3-6	8-10	13-15	18-22
Size of raw materials (mm)	≤200	≤200	≤300	≤300
Size of final products (mm)	≤3	≤3	≤3	≤3
Speed of shaft (r/min)	1150	1150	1100	1100